
Using Ethernet cables (Cat 5, Cat 5e, etc.) that plug into your devices, you can connect to the internet via an Ethernet connection, also known as a wired connection. Since Ethernet connections are practically hardwired into the internet, they are speedier. It is not necessary for your traffic to travel across wireless signals to reach your device.
Yes, is the response. Cat5e and Cat6 are compatible with one other since they use the same RJ45 plug standard, even though their pin coatings may differ. However, you are only able to access the lowest link in the chain at a restricted speed.
Because of its affordability and flexibility in supporting gigabit speeds, CAT5e is currently the most widely utilized cabling type. The planet is home to billions of meters of CAT5e. They have a 1 Gbps or 2.5 Gbps bandwidth capacity.
Cat6 cables are typically the recommended kind, even though Cat5e and Cat6 are also excellent options for gaming over Ethernet connections.
So, Cat5e will work just fine unless you believe that you could want 10 Gigabits across a particular link. Cat5e cable is rated to support up to 10 Gigabit Ethernet over short distances, which makes it suitable for use as a backbone link, for instance, within a server room.
Compared to Cat5, which has a maximum frequency of 100 MHz, Cat5e cables are rated at 350 MHz, a considerable increase in frequency. Cat5e cables may handle Gigabit Ethernet speeds because of their enhanced bandwidth, which increases the capacity for transporting information.
You will want Cat6 cable to accommodate the increased bandwidth required for 4K video (4K video is NOT feasible with Cat5 cable).
Security cameras can rely on either of these wires. For the majority of IP security cameras available on the market today, Cat5e cable provides more than enough bandwidth. It is thus a fantastic option for the majority of monitoring installations.
48V rms is the maximum operational voltage. At 25°C, the maximum continuous current per conductor is 1A.
Why 100m then? It is related to the signal characteristics and electrical interface described in the standard. Using existing cabling was one of the concepts behind twisted pair, and the maximum length that still fit criteria like attenuation, crosstalk, etc. was about 100m.
0