principles of lights, three techniques and four kinds of lights can not buy to know

First, the lighting atmosphere to look good, follow the two major principles of light selection

Principle 1: see the light do not see the light

The so-called see light not see light is to be able to feel comfortable in the space inside the light, but can not see the obvious or harsh main light source, so that the lighting atmosphere can make people aluminum extrusion cnc feel relaxed.

Suggestion: to realise the effect of the light is not seen, not only need to pay attention to the choice of style suitable lamps and lanterns, but also the need for professional lighting design, pre-house systematic circuit layout, for the later installation and debugging to lay the foundation.

Principle 2: uniform colour temperature

The colour temperature of the light can be intuitively understood as the light to give you a warm and cold experience, white light is cold, yellow light is warm, the whole house class light only to achieve a uniform colour temperature, in order to create a coordinated and comfortable light atmosphere.

Suggestion: choose the light must pay attention to the colour temperature value, do try to unify. For most home environments, lamps and lanterns colour temperature control in 3000 ~ 4000k is more suitable.

Second, the lamp modeling to coordinate, pay attention to the three selected lamp skills

Tip 1: according to the furniture style selection lamp

Lamps to look good, we need to coordinate with the overall tone of the home, the most simple and effective way is to use the lamps and other items in the space echo, which is the focus of the furniture. Here are some examples:

If the sofa is curved, choose a lamp with the same more rounded shape to echo.

If the sofa is a lighter shape, you can choose a clean and simple shape of the line lamp, to achieve the lamp and sofa tonal consistency, with the effect is quite good.

In fact, in addition to echo, in order to make the space appear more dynamic, you can also try to use a sense of contrast to choose the lamp, can also achieve unexpected results. Example:

If your home sofa selected more solid and heavy, you can use a more slender shape of the floor lamp to do with it.

Note: Be careful to choose the presence of too strong chandelier, because it will visually compress the height of the space, will make the whole room is short and depressing.

Tip 2: according to the form of light-emitting lamps

The light of the lamp can actually be divided into direct light and diffuse reflection light two kinds of light, it is not recommended to choose direct light light fixtures, because the light is too direct, there will be a blinding feeling, such an environment makes people feel uncomfortable.

It is recommended to choose diffuse reflective light, such as this type of frosted lampshade models, the light emitted by the soft natural light is not blinding, in such an environment, so that people feel soft and comfortable.

If you think the living room is not high enough friends, you can consider installing a lamp of this kind of up and down light, will make the space immediately show a lot of high.

Tip 3: according to the size of the space to choose the lamp

In the end to buy what size lamp is suitable? Buy a big sudden, buy a small show petty ...... Here is the insider summary of the lamps and lanterns size calculation method:

(space length + space width) ÷ 12 = lamp size

For example, the living room is 4 metres long and wide, so a chandelier with a diameter of 70 cm would be more suitable.

For the dining room, the chandelier should buy how much it is recommended according to the size of the dining table to determine, if it is a long dining table, it is recommended to choose a long lamps and lanterns, lamps and lanterns about the length of the dining table of 3 / 4 on the more coordinated.

If it is a round table on the choice of round chandelier, chandelier size about 1/2 of the table.

Third, the lights to not step on the pit, four styles and then cheap do not buy

1. Crystal chandelier

This crystal chandelier look at the picture feel good, but there are three fatal flaws: one is easy to accumulate dust, and health is difficult to take care of; two is a small bulb is easy to break, maintenance extrusion profiles is also relatively troublesome; three is its own special heavy, at least thirty or forty pounds, there is a risk of smashing down to injure a person.

2. Lampshade sealing bad lamp

This lampshade seal is not good lights have three defects: First, the light will leak out, affecting the lighting effect; Second, dust is easy to enter, and difficult to take care of; Third, especially small insects, and finally there will be a lot of small insects inside the body.

3. Multi-colour temperature but poorly controlled lights

This kind of white light, warm light, neutral light multi-colour temperature lamp design intention is still good, you can freely choose to like the colour temperature, but in practice we are usually only accustomed to use one. Plus some cheap models do not have a memory function, each time you turn on the light to repeatedly press the switch a few times in order to adjust to their favourite mode, it is very inconvenient to use.

4. Colourful ceiling lamps

This will be able to send out a variety of coloured light lamp is too rustic, open will have a kind of KTV sense of dismay, because the light source is different, will be a bunch of ballasts and particularly v slot extrusion easy to bad, bad after you can not replace the bulb, who bought who turned over.

Fourth, the lamps and lanterns to be good, the installation position is very critical

There is a saying: "light buy the right, not the right an right." Only the height and location of the installation of scientific, in order to ensure that the lights to achieve make

6