What are IoT applications?

What are IoT applications?

IoT applications run on IoT devices and can be created to be specific to almost every industry and vertical, including healthcare, industrial automation, smart homes and buildings, automotive, and wearable technology. Increasingly, IoT applications are using AI and machine learning to add intelligence to devices.

What is difference between cat-M1 and NB-IoT?

Bandwidth and Data RateNB-IoT uses a very narrow bandwidth (200 kHz), compared to Cat-M1 which uses 1.4 MHz. As a result the maximum data rate for NB-IoT is around 250 kb per second. Compared to Cat-M1 - up to 1 Mbps.

What is GSM module Arduino?

The Arduino GSM shield allows an Arduino board to connect to the internet, send and receive SMS, and make voice calls using the GSM library. The shield will work with the Arduino Uno out of the box.

What is LoRa and NB-IoT?

LoRaWAN is a low power IoT protocol that comprises the LoRa radio technology, allowing for an open, reliable, and economical network deployment. By contrast, NB-IoT is a licensed LTE radio technology offering low latency and strong security at a steeper price point.

What is full form Wi-Fi?

Wi-Fi, often referred to as WiFi, wifi, wi-fi or wi fi, is often thought to be short for Wireless Fidelity but there is no such thing. The term was created by a marketing firm because the wireless industry was looking for a user-friendly name to refer to some not so user-friendly technology known as IEEE 802.11.

What is full form of GSM?

GSM (Global System for Mobile communication) is a digital mobile network that is widely used by mobile phone users in Europe and other parts of the world.

Is MQTT TCP or UDP?

Does MQTT use TCP or UDP? MQTT uses TCP. Due to ordering requirements MQTT over UDP is not possible.

Which is best AI or IoT?

AI scalability is less as compared to IoT. but AI can be implemented on IoT devices with high reach to control them. IoT scalability is quite larger as it is based on the cloud.

What is Fullform of SIM?

The full form of SIM is the Subscriber Identity Module or Subscriber Identification Module. SIM is a portable chip and built-in circuit that stores the international mobile subscriber identity (IMSI) in a strong, safe way.

What is the difference between module and modem?

A modem typically contains a module, which in turn contains a chipset. A modem incorporates standardized voltages and a hardware interface that's easier to work with and significantly reduces design and prototyping schedules and costs. It is also possible to have sensors incorporated into the packaging of the modem.

23